The usage of granite and porcelain called azna stones in the building is everywhere like usa and their features.
The mineral that makes up porcelain stone is either dolomite or limestone. A stone that has been recrystallized as a result of the particles and minerals within it having withstood the pressure and heat beneath for hundreds of years.
This stone has undergone a metamorphosis and incorporated other minerals into its composition.
It is one of the few Chinese stones that are at a high level in terms of quality, and its name comes from the urban mine from where it is mined. The Azna porcelain stone is used to make porcelain.
Natural stones, such as the Azna porcelain stone, can be worked into slabs, tiles, steps, columns, and other forms using various processing techniques.
One of the forms of porcelain stone that is utilized in a variety of applications across the structure is known as Azna porcelain stone.
For a very long time, people in Asia have made use of this stone in their dwellings; but, because there was no contemporary technology available at the time, it could only be used in very small sizes.
In the past, in order to remove this stone, explosive methods were utilized, which resulted in low levels of productivity.
Getting it out of the mines, however, requires the use of contemporary technology, which makes the process significantly more efficient than it was in the past.
The interior of an Azna porcelain stone tile has a white background hue, and one can see wavy gray and black lines running through it.
Because it is composed of crystals, this stone can be polished to a high sheen and is excellent at reflecting light. As a result, it is possible to utilize it to make the appearance of most buildings appear brighter, particularly in the inner areas of the building.
This stone is visually reminiscent of marble and white marble, particularly in terms of its look.
Use porcelain stone made from Azna rather than more expensive marble or marble for construction projects that are intended to have a somewhat lower overall cost. Marble and marble are both more expensive.
If you compare the porcelain stone of Azna with other instances, you will discover that this stone is far more suitable in terms of both the quality and elegance of its appearance as well as the price at which it is offered.
There are, of course, some elements that have a direct impact on the price of Azna porcelain stone. Some examples of these factors are shown below.
The stone that is uniform in color and brightness and free of green and black halos might command a higher price.
The price of the stone is directly influenced by the thickness of the stone. For instance, the price of Azna porcelain stones with a thickness of 2 centimeters can be significantly more than the price of stones with a thickness of 1.6 or 1.9 centimeters.
Thicknesses greater than two centimeters are not only significantly more expensive but are also frequently shipped to foreign nations.
The larger the size of the stone, the greater the price that will be asked for it will be.
The price of stone will be impacted in various ways depending on the quality of the stone’s processing, including its cutting and shaping.
Azna slab stone
Porcelain Stone quarried
Every day, more and more people are using stone slabs in their construction projects. Because of its bright white hue and relative polish, this porcelain stone is frequently utilized in the construction of a variety of buildings.
Some structural experts are of the opinion that although Azna slab stone is more affordable than other Chinese stones, it will soon be able to replace stones that are significantly more costly.
The use of Azna stone slabs is a good option due to the stone’s diagonal and longitudinal veins, which can be found in the form of Book Match slabs (a method of homogenizing a book in such a way that the veins of two large pieces of stone are symmetrical) and Four match slabs (four pieces of slabs consisting of two Book Matches on top of each other in such a way that the veins are symmetrical on the common sides), which are utilized.
Because of its numerous desirable qualities, slab stone is an excellent material choice for usage in both the interior and exterior of a structure.
Because of its high level of abrasion and bending resistance, as well as its white color and absence of impurities, the Azna porcelain stone can be utilized in a variety of various portions of industrial, residential, and commercial structures, amongst other places.
In a general sense, some of the characteristics of Azna porcelain stone include the following.
- It is highly polished, resulting in a smooth finish.
- Very low porosity
- Very little uptake of water at all.
- A somewhat high level of resistance to both abrasion and corrosion
- Adaptable to a wide range of purposes
- Heat-resistant up to a certain point
- Suitable for usage in locations with moderate heat and humidity
Given the characteristics of Azna slab stone, it stands to reason that this type of stone can be utilized in a wide variety of the building’s components. The following are examples of some of the most common applications for Azna slab stone.
- The space included within the building
- Putting down new flooring in the lobby, reception area, and rooms
- Construction of walls
- The lobby as well as the entrance hall of luxurious buildings
- Hotels, retail establishments, and upscale shopping malls
- The point of sale found in public places
- Cabinets and open floor plan area within the kitchen
- Elegant sanitary facilities
- The master suite’s bathrooms
- Creating volumes of vanities and works of stone art
- Outdoor room in addition to parking spaces
- Both landscaping and landscaping are included.
- Stairs and the area beneath the stairs
- The stairwell and the wall
Stone slabs made of Azna can, of course, be utilized not only within a building’s interior but also on the exterior of the structure.
The porcelain stone known as Azna possesses a vibrant hue and is resistant to sex. As a result, it is able to maintain a comfortable temperature within the building even during the warmer months of the year.
However, if Azna porcelain stone is used for the exterior of the building, it is necessary to get the assistance of stone retaining clamps in order to keep it at a height and use it on the facade.
This is because Azna porcelain stone has low adhesion to the mortar, which is why it is used for building exteriors.
After being extracted as raw material or scrap, the material is sent to specialized stone processing companies where it is transformed into slabs or tiles. In the processing of stone, the surface is polished and coated with epoxy or resin.
By taking this precaution, they extend the stone’s durability and protect it from moisture, scratches, and other forms of wear and tear.
It is not just the Azna slabs that are exported as coupes. But after being processed, they are offered to the public in the sizes most requested by the customers.
We are appreciative that you have made the effort to read each and every word of this post. Do not be hesitant to get in contact with us if you have any inquiries regarding the varying options that are now available for the personalization of the product.
We are more than happy to provide answers to any inquiries that you might have. The members of our team will collaborate with one another to ensure that the report is presented in a manner that is tailored to meet the requirements that you have outlined.
This will be done in order to guarantee that the finished product will live up to the standards that you have established for it. This will ensure that the final product meets all of your expectations
Your comment submitted.